Digital Operator 3 - 15Example of Changing a ParameterTable 3.14 provides an example of how to change parameter “C1-02” (Deceleration Time 1) from 30 seconds to 40 seconds.Table 3.14 Changing a Parameter in the Programming MenuStepNumber Digital Operator Display Description1 The Drive is first powered up.2 Press the MENU key to scroll to “Operation” menu.3 Press the MENU key to scroll to “Quick Setting” menu.4 Press the MENU key to scroll to “Programming” menu.5 Press the DATA/ENTER key to enter “Programming” menu.6 Press the INCREASE key until C1-01 (Accel/Decel) is displayed.7 Press the SHIFT/RESET key to move flashing digit to the right.-DRIVE- RdyFrequency RefU1-01= 0.00Hz- - - - - - - - - - - - - - - - - - - -U1-02= 0.00HzU1-03= 0.00A-DRIVE-** Main Menu **- - - - - - - - - - - - - -Operation-QUICK-** Main Menu **- - - - - - - - - - - - - -Quick Setting-ADV-** Main Menu **- - - - - - - - - - - - - -Programming-ADV-Initialization- - - - - - - - - - - - - - - - - - - -A1-01= 0Select Language-ADV-Accel/Decel- - - - - - - - - - - - - - - - - - - -C1-01= 1.0secAccel Time 1-ADV-Accel Time 1- - - - - - - - - - - - - - - - - - - -C1-01= 30.0sec(0.0~6000.0)“30.0sec”
