YASKAWA F7 User Manual

Also see for Varispeed f7: Connection manual Programming manual User guide Instruction manual User manual

Contents

Start-Up 4 - 2Drive Start-Up PreparationIn order to provide the most reliable Drive available and to avoid any extra costs related to loss or reduction of warrantycoverage, an authorized Yaskawa service representative should complete this start-up procedure. Please complete thefollowing checklist and maintain it in a secure location as technical service personnel may request information from thischecklist. Drive Start-Up PreparationDate:Start-Up Person:Company Name: _________________________________ Start-Up Location: _________________________________Sales Order #: ___________________________________ Serial #: ________________________________________Printed Name: ___________________________________ Drive Location: ___________________________________Phone #: _______________________________________ Signature: ________________________________________Owners Representative:Printed Name: ___________________________________ Phone #: _________________________________________Company: ______________________________________ Signature: ________________________________________Step 1. The Drive is thoroughly tested at the factory. The start-up person should verify that the Drive is free of shipping andinstallation damage. Shipping damage is not covered by the Yaskawa warranty. Claims must be filed with theshipping company as soon as possible for any potential recovery via insurance. 2. Review the F7 User Manual (TM.F7.01) shipped with the Drive. 3. Verify that the model number and voltage ratings in the purchase order match the nameplate data for each unit. 4. Location of the Drive is important to achieve proper performance and normal operating life. The unit should beinstalled in an area where it is protected from: Direct sunlight, rain or moisture Corrosive gases or liquids Vibration, airborne dust or metallic particles 5. Ensure the Drive is on a vertical surface with adequate space for air circulation (4.75” above and below, 1.2” on eachside). Refer to Fig 1-8. 6. Verify that the proper branch circuit protection is installed in front of the Drive. Refer to Appendix E - PeripheralDevices for proper input fuse or circuit breaker sizing.