Digital Operator 3 - 2Digital Operator DisplayThe Digital Operator is used for programming, operating, monitoring, and copying the Drive’s parameters. To copy parameters,F7 Drives must have the same software version, model, and control method. The various items included on the DigitalOperator are described below.Fig 3.1 Digital Operator Component Names and Functions-DRIVE- RdyFrequency RefU1-01= 60.00Hz- - - - - - - - - - - - - - - - - - - - - - - - - - - - -U1-02= 60.00HzU1-03= 10.05ADrive Mode IndicatorsSee Table 3.2Data DisplayDisplays monitor data, parameter data and settingsRUN & STOP IndicatorsSee Tables 3.5 and 3.6Ready DisplayDrive can operate when a Drive command is input1 line x 13 characters3 lines x 16 charactersMenu DisplayKey DescriptionsSee Table 3.1-QUICK-Control MethodA1-02= 3 *3*Flux Vector“2”Currently Programmed ValuePresent Selection (User adjusts)DATA DISPLAY EXAMPLEFactory DefaultSetting---------------------------------
