Chapter 22-20F-2-653) Connect the power cable to the outlet.4) Turn on the main power switch.5) Login to the service mode.6) Select the followings to register '1'; COPIER > OPTION > ACC > OUT-TRAY.7) Turn OFF the power supply following the shutdown sequence.8) Check to see the following menu items are added; [Additional Functions]> [Common Settings] > [Delivery Tray Setting].9) Select the copy at the tray B, and execute test print.10) Check to see that the copy is delivered to the copy tray.11) According to user's request, reset the tray.2.8 Installing the Card Reader2.8.1 Points to Note at Installation 0018-7144Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C25502.8.2 Checking the Contents 0013-8327Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C2550F-2-66F-2-672.8.3 Turning Off the Machine 0013-8384Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C2550See the host machine installation 'Points to Note When Turning Off the MainPower'.2.8.4 Installation Procedure 0013-8330Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C25501) Open the cassette right upper cover [1]. If the cassette pedestal was in-stalled, open also the cassette right lower cover [2].To install the Card Reader-C1, the Card Reader Kit-B1 is necessary.[1] Card reader 1pc.[1][1][2]C[1] [2] [3][2]* Screw (RS tightening; M4X10) 1pc.[3]* Toothed washer 1pc.* not used in this machine[1] Card reader base plate 1pc.[2] Relay harness 1pc.[3] Screw (TP; M4X25) 1pc.[4] Screw (TP; M4X8) 1pc.[5] Toothed washer 2pc.- When installing the equipment, see the 'Combination Table of AccessoryInstallation'.- After installing the Card Reader-C1, enter the card number to use in theservice mode of this machine by selecting the following: COPIER >FUNCTION > INSTALL > CARD. Unless entering the card number, thecard fails to be recognized when inserting the card.- When installing the machine, see the Combination Table for AccessoryInstallation.[1][2] [3] [4] [5]
