Chapter 1010-1110.4.5 Energy-Saving Function10.4.5.1 Overview 0013-8673Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iRC25501. Standby ModeIn standby mode, the machine is more or less ready to start a job, i.e., all its components are supplied with power.2. Power Save ModePower status change control: low-power and sleep mode are called power-save mode as a generic term. The power mode changes from stand-by to low-power, thento sleep automatically.T-10-9T-10-10*1 Service mode:COPIER > OPTION > BODY > WUEV-LIVDefault: 15 secSetting range: 10 to 600 sec3. AC Off ModeThe machine remains in this sate when its main power switch remains off. All its power remain off.10.4.5.2 Power Supply Control 0013-8674Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iRC2550The machine's power supply conditions are as follows:T-10-11Low power mode (at time ofshipment)shift The machine moves through different states in response to the passage of times programmedin advance.Description The machine performs its power save functions in keeping with the requirements of theEnergy Star standards.Sleep mode Shift The machine moves through different sates in response to the passage of times selected inAdditional Function or in response to a press on the control panel software power switch.Description In sleep mode 1, the DC controller PCB and the main controller PCB are supplied withpower. In sleep mode 2, the main controller PCB is supplied with power. In both sleep modes1 and 2, the power to the fixing AC heater is off.Also, if there is a network communication and RTC communication during the sleep mode2, the machine can recover without booting the HDD. When booting the HDD, sleep mode1, the protection time (120 min) to protect the HDD duration number must be retained. Powerconsumption can be kept at low level by not booting the HDD.When there is network communication and RTC communication during sleep mode 2, themachine recovers as CPU recovery status (without booting HDD). If there is no Networkcommunication for 15 sec after the recovery of CPU, the machine transits to sleep mode 2.If there is a network communication during 15 sec after recovery, the machine transits tosleep mode 2 after service mode setting time (*1) from the last network communication.Copy / stand-bymodeLow-power / sleep 1mode Sleep 2 mode AC OFF moderemote 1 ON ON OFF OFFremote 2 ON OFF OFF OFFACC power supply PCB non-all night 24VA ON OFF OFF OFF
