Chapter 1717-10417.8 COUNTER (Counter Mode)17.8.1 COPIER17.8.1.1 COPIER Table 0014-6141Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iRC2550The COPIER/COUNTER screen is shown below. The items are described starting on the next page.F-17-20Clearing counter values1) Select the item to clear, displaying it in reverse.2) Press the clear key on the operation panel.- The counter is cleared, resetting it to "00000000".Small size and large size in this mode- TOTAL/PICKUP/FEEDER/JAMLarge (L) size: Paper larger than A4, LTR sizeSmall (S) size: A4, LTR size and smaller paper- DRBL-1/DRBL-2 (PD-PU-RL)Large (L) size: Paper longer than 324 mm in the feed directionSmall (S) size: Paper 324 mm or shorter in the feed direction- DRBL-2 (DF-PU-RL, DF-SP-PD)Large (L) size: Paper longer than the LTR length (216 mm) in the feed directionSmall (S) size: Paper of the LTR length (216 mm) or shorter in the feed directionReading counters for consumable parts/parts needing periodic replacementThe copier has special counters (DRBL-1/DRBL-2) that can be used to provide a guideline for when to replace consumable parts or parts needing periodic replace-ment.Small size sheets are counted in increments of 1, large size sheets are counted in increments of 2.[1]: Displays the part name. In this example, the intermediate transfer belt unit.[2]: Displays the counter value (actual number of sheets used). The value is cleared by pressing the clear key when the part is replaced.[3]: Displays the limit value (number of sheets as guideline for replacement). You can select the item and change the value with the numeric keypad. Afterchanging the value, press the OK key.[4]: Displays the ratio of the counter value to the limit value.[5]: When the ratio is between 90% and 100%, a single exclamation mark (!) is displayed.When the ratio is over 100%, two exclamation marks (!!) appear. In the example above, no exclamation marks would appear.[6]: Displays the predicted number of days until replacement. The example above shows 82 days.1. TOTAL T-17-63TR-BELT / 00000201 / 00240000 / 0% !! 000082[1] [2] [3] [4] [5] [6]COPIER>COUNTER>TOTALSub item Description level.SERVICE1 Service total counter 1Incremented when paper is delivered outside the printer.(Incremented for both large and small size sheets.)Returns to "00000000" after reaching "99999999".1
