Chapter 1414-4COPIER>FUNCTION>INSTALL>STRD-POSc. white level adjustmentCOPIER>FUNCTION>CCD>DF-WLVL1COPIER>FUNCTION>CCD>DF-WLVL2When you have finished the foregoing adjustments, put the P-PRINT print-out [1] you have previously generated in the service book cassette to replacethe old P-PRINT printout.F-14-814.5.2 After Replacing the DC Controller PCB 0015-0330Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080i / iRC2550- Before replacing the DC controller PCB, generate the latest P-PRINTprintout:COPIER>FUNCTION>MISC-P>P-PRINT1) Download the latest system software by the SST.2) After replacing the DC controller, initialize the memory of the DC con-troller PCB using the following service mode item:COPIER>FUNCTION>CLEAR>DC-CON3) Enter the values indicated on the service label using the following servicemode items:- COPIER>ADJUST>LASER>LA-PWR-A,B,C,DFS LUT-Y1 to 8FS LUT-M1 to 8FS LUT-C1 to 8FS LUT-K1 to 8- COPIER>ADJUST>IMG-REG>REG-H-Y,C,M,KREG-HS-Y,C,M,KREG-V-Y,C,M,K- COPIER>ADJUST>DENS>SGNL-Y,M,C,KSIGG-Y,M,C,K- COPIER>ADJUST>CST-ADJ>MF-A4R,A6R,A4- COPIER>ADJUST>FEED-ADJ>REGISTADJ-C1,C2,C3,C4,MF,DK,C1RE,C2RE,C3RE,C4RE,DKRE,MFREREG-THCK,OHT,DUP1,DUP24) If any value is recorded in the Remarks field of the service label, enter thevalue in service mode.5) Turn off the control panel power switch.6) Turn off and then on the main power switch.14.5.3 Replacing Main Controller PCB 0014-3119Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080i / iRC2550After mounting the main controller PCB (main), mount each PCB that is re-moved before the replacement.[1] Main Controller PCB (Sub R-A)[2] Main Controller PCB (Sub PDEM-EF-A)[3] Main Controller PCB (Sub SJ-A)[4] Main Controller PCB (Sub LANBAR-C)[5] BOOT ROM (storage of program for BOOT)[6] SRAM PCB[7] DDR-SDRAM[8] Main Controller PCB (Sub RB-A)[9] HDDF-14-914.5.4 When Replacing the SRAM PCB 0014-3121Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080i / iRC2550When the SRAM PCB is replaced, all data in its memory will be lost (file-related, user mode-related, service mode-related, history-related files). Therewill be no error operation, and initialization will take place automatically.If you pull out the SRAM PCB from machine B and mount it to machine A,the PCB will be initialized and be rendered useless for machine A or B. Takefull care.1) When you turn on the power after replacing the SRAM PCB, the machinewill perform automatic initialization and will indicate a message on itspanel to the effect that you are to turn off and then on the power switchfound on its right side. Follow the message and turn off and then on themachine.2) Using service mode, initialize the RAM.COPIER> FUNCTION> CLEAR> MN-CONBefore starting the work, be sure to inform the user that all image data storedin the Box will be lost and obtain his/her consent.14.5.5 When Replacing the HDD 0014-3123Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080i / iRC25501. If NetSpot Accountant (NSA) Is Not Used1) Formatting the HDDWhile holding down the 2 and 8 keys on the control panel, turn on thepower to start up. Using the HD formatting function of the SST, formatall partitions.2) Downloading the SoftwareUsing the SST, download the various software (system, language, RUI).The machine will take about 10 min to start up after downloading.2. If NetSpot Accountant (NSA) Is Used Together with a Card ReaderThe card ID used by the NSA resides on the HDD. If you have replaced theHDD, therefore, you will have to newly download the card data from NSAto enable the statistical operations of NSA. After going through steps 1) and2) above, perform the following:1) Set the following in service mode:Select the following : COPIER >FUNCTION >INSTALL >CARD; then,enter the number of the first card, and press [OK].(For instance, if cards No. 1 through No. 1000 are used for group control,enter '1')2) Turn off and then on the machine; when the machine has started up, per-form the following in user mode:Select the following : user mode >system control settings >group IDcontrol >count control; then, check that IDs from 00000001 through[8][1][2][2][3][4][5][6][7][9]
