Chapter 99-149.5 Parts Replacement Procedure9.5.1 Fixing Unit9.5.1.1 Before Removing Fixing Unit 0014-0573Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C25501) Detach the rear right cover. (page 10-16)[Detaching the Rear Right Cov-er]2) Open the right cover fully (to the point where it does not interfere with oth-er parts). (page 10-38)[Opening/Detaching the Right Cover]9.5.1.2 Removing Fixing Unit 0014-0574Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C25501) Detach the connector cover [1].- 1 screw [2]F-9-92) Remove the fixing unit [1].- 3 connectors [2]- 4 screws [3]F-9-109.5.2 Fixing Film Unit9.5.2.1 Before Removing Fixing Film Unit 0013-8778Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C25501) Detach the rear right cover. (page 10-16)[Detaching the Rear Right Cov-er]2) Open the right cover fully (to the point where it does not interfere with oth-er parts). (page 10-38)[Opening/Detaching the Right Cover]3) Remove the fixing unit. (page 9-14)[Removing Fixing Unit]9.5.2.2 Removing Fixing Film Unit 0013-8779Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C25501) Detach the fixing front cover [1].- 2 screws [2]F-9-112) Slide the shutter sensor holder [1] in the direction of the arrow to detach.- 1 screw [2]MEMO:When detaching the shutter sensor holder, the 2 connectors [3] need not todisconnect.3) Remove the shutter unit [4].- 5 screws [5]F-9-12Points to note when mounting the shutter unitThe fixing film may be damaged when the shutter unit [1] is mounted. Mountit according to the following procedure.1) Place the protective film [2] on the fixing film.F-9-132) Fit the shutter unit [1] in the positioning area [2] and mount it.[1][2][1][2][2][3] [3][1][2][4][5][3][5][3][5][1][2][2][1]
