Chapter 22-25F-2-877) Fix the key switch unit [2] to the key switch bracket [1].- 1 screw (binding; M4X6) [3]F-2-888) Disconnect the connector [1] on the host machine from the wire saddle [2]to get it out to the rear side of the host machine.9) Close the wire saddle.F-2-8910) Fix the key switch bracket [1].- 1 screw [2] (screw removed in the step 6)F-2-9011) Connect the connector of the key switch unit to the connector [1] of themain unit.F-2-9112) Remove the blanking area [2] of the right rear cover [1] with nipper, etc.F-2-9213) Attach the right rear cover.14) Close the cassette right upper cover and the cassette right lower cover.15) Connect the reader power supply cable.16) Attach the rear upper cover.17) Fix the cable removed in the step 1) to the wire saddle.18) Connect the power supply cable to the power plug.19) Turn ON the main power switch.2.10.4 Checking After Installation 0013-8325Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C25501) Enter the service mode.2) Select COPIER > FUNCTION > INSTALL > KEY, register '1'.3) Turn OFF/ON the main power switch according to the shutdown se-quence.4) Check the display 'Please set the control key'.5) Insert the control key into the key switch unit and rotate it, check if thedisplay in the step 4) disappears.2.11 Installing the Voice Guidance Kit2.11.1 Checking the Contents 0014-2056Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C2550[2][1][2][1][3][1][2][2][1][1][1][2]
