Chapter 1717-9917.6.2 SORTER17.6.2.1 SORTER Table 0013-9439Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iRC2550T-17-60OF-PSLIP ON/OFF of PS and LIPS subsequent to disabling transmissionThis selects ON or OFF for PS and LIPS.Settings0: OFF1: ON[Factory setting/value after clearing RAM: 0]2ST-PSPCU Display of installation status of PS, PCL and UFR subsequent to disabling transmissionThis displays the installation status of the combined options consisting of PS, PCL and UFR.Settings0: OFF (options not installed)1: ON (options installed)[Factory setting/value after clearing RAM: 0]2TR-PSPCU Acquisition of PS, PCL and UFR transmission license key subsequent to disabling transmissionThis acquires the transmission license key in order for PS, PCL and UFR to be used by another MFP. 2OF-PSPCU ON/OFF of PS, PCL and UFR subsequent to disabling transmissionThis selects ON or OFF for PS, PCL and UFR.Settings0: OFF1: ON[Factory setting/value after clearing RAM: 0]2ST-LXUFR Display of installation status of LIPS LX (known as "UFR II" overseas) subsequent to disabling transmissionThis displays the installation status of the combined options consisting of LIPS LX (known as "UFR II" overseas).Settings0: OFF (options not installed)1: ON (options installed)[Factory setting/value after clearing RAM: 0]2TR-LXUFR Acquisition of LIPS LX (known as "UFR II" overseas) transmission license key subsequent to disabling transmissionThis acquires the transmission license key in order for LIPS LX (known as "UFR II" overseas) to be used by anotherMFP.2OF-LXUFR ON/OFF of LIPS LX (known as "UFR II" overseas) subsequent to disabling transmissionThis selects ON or OFF for LIPS LX (known as "UFR II" overseas).Settings0: OFF1: ON[Factory setting/value after clearing RAM: 0]2ST-HDCR2 Display of installation status of all hard disk data erasure subsequent to disabling transmissionThis displays the installation status of all hard disk data erasure.Settings0: OFF (not installed)1: ON (installed)[Factory setting/value after clearing RAM: 0]2TR-HDCR2 Acquisition of all hard disk data erasure transmission license key subsequent to disabling transmissionThis acquires the transmission license key in order for all hard disk data erasure to be used by another MFP. 2OF-HDCR2 ON/OFF of all hard disk data erasure subsequent to disabling transmissionThis selects ON or OFF for all hard disk data erasure.Settings0: OFF1: ON[Factory setting/value after clearing RAM: 0]2SORTER>OPTIONSub item Description level.BLNK-SW Fold position margin width (W) settings when saddle stitcher is usedSetting values0: Normal width (5 mm)1: Extra width (10 mm)[Factory settings and after RAM clear: 0]1MD-SPRTN Finisher function restriction settingSetting values0: Normal1: Reduced operation[Factory settings and after RAM clear: 0]1COPIER>OPTION>LCNS-TRSub item Description level.
