Chapter 1616-2516.5 Alarm Codes16.5.1 Alarm Code 0014-6467Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iRC2550T-16-13Block Code Detailed Code02 scanning system 0020 Correction of white streaks caused by dirt on the copyboard glass04 pickup / feeding system 0008 Optional deck lifter error0009 Side registration home position detection error09 Printer Unit, Copier Exposure system,Photosensitive drum unit system 0001 End of drum life (Y)0002 End of drum life (M)0003 End of drum life (C)0004 End of drum life (K)10 Developing System, Copier 0001 Toner low(Bk)(This alarm code issued by RDS.)0002 Toner low(Cy)(This alarm code issued by RDS.)0003 Toner low(M)(This alarm code issued by RDS.)0004 Toner low(Ye)(This alarm code issued by RDS.)11 Waste Toner Collecting system 0001 Waste toner box full (transfer belt)30 High-voltage system 0002 Leakage inside transfer charging assembly31 Contoroller system 0003 Alarm for all-night power supply reset33 FAN 0011 Alarm for fixing heat exhaust fan34 Image position correction system,copier 0001 The auto registration pattern read data includes a 0. -> The presence of dirt or a scratch on the belthas been wrongly identified as a pattern, thus causing a discrepancy in the read data.0002Of the 10 sets of the auto registration patterns, 8 sets or more include error data. -> The presenceof dirt or a scratch on the belt has wrongly been identified as a pattern, thus causing a discrepancyin the read data.0003An attempt to read 10 sets of auto registration patterns has failed, ending in a time-out condition.-> The registration sensor is faulty, the registration sensor cleaning member is blocking theregistration sensor, or no image has been drawn on the belt.50 ADF system 0010 The separation alarm is continuously given.61 Finisher 0001 Running out of staples.62 Sadle Finisher 0001 Running out of stitching staples65 Panther 0001 Puncher waste receptacle is full.70 Memory/HDD 0007 Detecting faulty operation for HDD access request72 Surf 0001 Indicates the faulty access to the register0002 Indicates the faulty data transmission to the memory (includes timeout)0003 Indicates the rendering error (ECI module)0004 Indicates the rendering error (EM module)0005 Indicates the rendering error (IE module)0006 Indicates the rendering error (IDM module)0007 Indicates the rendering error (LAM module)0008 Indicates the rendering error (MI module)0009 Indicates the rendering error (PCM module)0010 Indicates the rendering error (PGM module)0011 Indicates the rendering error (VII module)0012 Indicates the rendering error (VOI module)0014 Indicates the rendering error (rendering timeout)0015 Indicates the rendering error (MRA module)0016 Indicates the rendering error (POC module)
