Chapter 1616-116.1 Error Code Table16.1.1 Error code tables 0014-6626Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iRC2550T-16-1Code Description***: Finisher-Z1 ****: Finisher-Y1, Saddle Finisher-Y2 *****: Puncher UnitE001 Abnormality high temperature error of the fixing unitE003 Low temperature of the fixing unit after standbyE004 Thermistor is not connectedE009 Error in pressure/release of fixing film unitE012 Drum/ITB motor errorE013 Error in the waste toner motorE015 Error in the registration/multifeeder motorE020 Error in the developing assembly (Toner fault: ATR error)E021 Developing motor errorE025 Error in the toner motorE032 The counter of the NE controller fails to operate.E045 OHP sensor errorE067 Error in the relation of high-voltage (Primary transfer)E100 BD errorE110 Error in the polygon motorE193 Error in IMG1 (failure of add-on)E202 CIS unit HP detection errorE225 CIS light quantity errorE227 Power supply error in the reader unitE240 Error in communication of controllerE243 Control panel unit errorE244 Error in connection of the flexible cable on the DC controller PCBE248 Backup memory errorE315 Abnormality of image dataE351 Main controller PCB errorE400 Feeder communication errorE413 Pressure motor troubleE490 Error in different feeder modelE500 Finisher communication errorE503 *** Finisher internal communication errorE505 Finisher backup memory errorE508 Error in different modelE514 *** Stack delivery error / **** End assist motor errorE519 **** Gear change motor errorE530 *** Rear alignment error / **** Front alignment errorE531 Staple errorE532 Staple unit shift errorE535 Swing errorE537 *** Front alignment error / **** Rear alignment errorE540 *** Stack tray up/down error / **** Upper tray up/down errorE542 **** Lower tray up/down error
