Chapter 1717-6017.6 OPTION (Machine Settings Mode)17.6.1 COPIER17.6.1.1 COPIER Table 0014-6028Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iRC25501. BODYFEED-CHK Use it to check paper movement in the ADF on its own.Operation1) Press [FEED-CHK] to highlight.2) Enter the number of the component using the keypad.3) Press the OK key.4) Press [FEED-ON] to start checking the operation.Feed Mode0: single-sided operation1: double-side operation2: single-sided operation w/ stamp3: double-sided operation w/ stamp[Factory default/After RAM clear: 0]1SL-CHK Use it to check the ADF solenoid on its own.Operation1) Press [SL-CHK] to highlight2) Enter the number of the component using the keypad.3) Press the OK key.4) Press [SL-ON] to start checking the operation.Number of Component0: lock solenoid1: stamp solenoid[Factory default/After RAM clear: 0]1SL-ON Use it to start the operation of the selected solenoid.OperationThe operation varies from model to model.1) Press [SL] to highlight; then, press the OK key to start motor operation.2) Press the OK key once again to stop the ongoing operation.(The operation will stop automatically in 5 sec; however, the indication will not change to [STOP] unless the OK key ispressed once again.)1MTR-ON Use it to start motor operation.OperationThe operation varies from model to model.1) Press [MTR-ON] to highlight; then, press the OK key to start motor operation.2) Press the OK key once again to stop the motor.(The operation will stop automatically in 5 sec; however, the indication will not change to [STOP] unless the OK key ispressed once again.)1ROLL-CLN Use it to clean the ADF roller.In this mode item, the roller is rotated by the work of its motor; it is cleaned by lint-free paper (moistened with alcohol)forced against it while it rotates.Operation1) Press [ROLL-CLN] to highlight.2) While the roller is rotating, clean it by forcing lint-free paper (moistened with alcohol) against it.3) Press [ROLL-CLN] to highlight, and press the OK key to stop the rotation of the roller.1FEED-ON Use it to check the movement of paper in the ADF on its own.Operation1) Press [FEED-ON], and then press the OK key so that the ADF starts to move paper according to the operation modeselected using [FEED-CHK].1FEEDER>FUNCTION (*1)Sub item Description level.
