Chapter 88-28F-8-22[1] Lifting plateSL4: Multi lifting plate up/down solenoidM6: Registration multi pickup motorA paper that is picked up from the manual feeder pickup assembly moves forward the distance where the predetermined arching (5.5 mm) is added after detectingthe leading edge with the pre-registration sensor (PS7). Then, the paper stops at the registration roller once by turning OFF the manual feeder pickup clutch (CL5).As the registration roller turns ON, the manual feeder pickup clutch (CL5) turns ON. After the registration roller feeds a paper for the predetermined amount (55mm), turn OFF the manual feeder pickup clutch (CL5).The pickup from the manual feeder pickup assembly is executed either the normal speed (55 mm/min) or the half speed (71.5 mm/min) depending on the media type.In case of the transparency, pickup is executed with the half speed and the paper is fed to the registration roller with the same speed. If there is another paper, pickupis executed by setting back the registration multi pickup motor speed (M6) to half when the first paper moves 5 mm downstream from the registration roller.Reference:The sensor that detects the last paper is not equipped with the manual feeder pickup unit of this machine.8.6.2 Basic Sequence of Operation 0014-0320Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iRC2550The multi-pickup roller starts to rotate when the manual pickup clutch (CL5) goes on to start upper separation to pick up a single sheet of paper. When the leadingedge of the sheet reaches the pre-registration sensor (PS7) and is moved a specific distance, the manual pickup clutch goes off, causing the sheet to arch in theregistration roller area.When the registration clutch (CL6) goes on, the manual feed pickup clutch (CL5) once again goes on to pick up paper. The manual feed pickup clutch (CL5) goesoff immediately before the trailing edge of paper moves past the manual feed pickup roller; thereafter, the registration roller serves to pull off the paper.M6DC Driver DC-CONMLT_SL_ON[1]SL4
