Chapter 1414-114.1 Scanning System14.1.1 After Replacing the CIS 0014-3109Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080i / iRC2550Be sure to enter the values indicated on the CIS label attached to the contactimage sensor (CIS) using the following service mode items:COPIER>ADJUST>CCD>CCDU-RG(offset value against color displacement caused by CIS)COPIER>ADJUST>CCD>MTF-MG(MTF correction value for main scanning direction)COPIER>ADJUST>CCD>MTF-SG(MTF correction value for sub scanning direction)F-14-1Also, be sure to update the values indicated on the service label attached be-hind the reader left cover by the values indicated on the CIS label.Reference:The machine is not shipped out of the factory with the CIS label attached toit.14.1.2 After Replacing the Copyboard Glass 0014-3111Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080i / iRC2550A. Enter the value indicated by the bar code found at the upper right on thecopyboard glass (copyboard cover) using the following service modeitems:COPIER>ADJUST>CCD>W-PLT-XCOPIER>ADJUST>CCD>W-PLT-YCOPIER>ADJUST>CCD>W-PLT-Z(standard white plate white level data X, Y, Z)F-14-2B. Enter the value indicated by the bar code found at the upper left of thecopyboard glass (copyboard sheet) using the following service modeitem:COPIER>ADJUST>CCD>BOOK-RG(offset value against color displacement caused by copyboard glass)F-14-314.1.3 After Replacing the ADF Reading Glass 0014-3113Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080i / iRC2550Enter the value indicated by the bar code found on the ADF reading glass us-ing the following service mode item:COPIER>ADJUST>CCD>DF-RG(offset value against color displacement caused by stream reading glass)F-14-4-012 72 70CCDU-RGMTF-MGMTF-SG820686679349W-PLT-XW-PLT-YW-PLT-ZBOOK-RG-04DF-RG002
