Chapter 11-421.2.5 Safety1.2.5.1 Laser safety 0013-8886Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iRC2550Laser beam radiation may pose a danger to the human body. A laser scanner mounted on the machine is sealed with the protection housing and external cover toprevent the laser beam from leaking to the outside. The laser beam never leaks out of the scanner as far as users operate the machine normallyThe following warnings are given to comply with Safety Principles (EN60950).Laserstrahlen können für den menschlichen Körper gefährlich sein. Aus diesem Grund ist das optische Lasersystem mit einem Schutzgehäuse und einer Außenab-deckung dicht verschlossen und hat eine Struktur, die keine Laserstrahlen nach außen dringen lässt. Unter der Voraussetzung, dass der Benutzer dieses Gerät normalbedient, ist ein Austritt von Laserstrahlen daher ausgeschlossen.1.2.5.2 CDRH Act 0013-8888Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iRC2550The Center for Devices and Radiological Health of the US Food and Drum Administration put into force regulations concerning laser products on August 2, 1976.These regulations apply to laser products manufactured on and after August 1, 1976, and the sale of laser products not certified under the regulations is bannedwithin the Untied States. The label shown here indicates compliance with the CDRH regulations, and its attachment is required on all laser products that are soledin the United States.F-1-32A different description may be used for a different product.1.2.5.3 Handling of laser system 0013-8891Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iRC2550When servicing the area around the laser assembly, be sure to turn off the main power.If you must servicr while the power is turned on, be sure to keep the followings:- Do not use a screwdriver or tools that have a high level of reflectance in the laser path.- Remove watches and rings before starting the work. (They can reflect the laser beam, possibly hitting the eye.)The machine's covers that can reflect laser light are identified by means of a warning label (Figure). If you must detach a cover showing the label, be sure to takeextra caution during the work.The following warnings are given to comply with Safety Principles (EN60950).
