Chapter 88-51F-8-918.11.19 Manual Pickup Roller8.11.19.1 Before Removing Manual Feed Pickup Roller 0014-1262Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C25501) Detach the rear right cover. (page 10-16)[Detaching the Rear Right Cov-er]2) Open the right cover fully (to the point where it does not interfere with oth-er parts). (page 10-38)[Opening/Detaching the Right Cover]3) Remove the manual feed unit. (page 8-50)[Removing Manual Feed Unit]8.11.19.2 Removing Manual Feed Pickup Roller 0014-1263Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C25501) Disconnect the connector [1].F-8-922) Remove the plate [1].- 1 screw [2]F-8-933) Disengage the claw and remove the bushing [1].F-8-94Points to note when attachingWhen attaching, be sure to attach the manual feed tray upper cover beforeattaching the bushing. Failure to do so may damage the bushing claw.4) Detach the manual feed tray upper cover [1].F-8-955) Remove the manual feed pickup roller [2] from the shaft.- 1 plastic E-ring [1]When removing the manual feed pickup roller, be careful not to drop thedowel pin.[1][3][1][1][2][1][1]
