Chapter 55-22F-5-405.4.2 Reader Controller PCB5.4.2.1 Before Replacing the Reader Controller PCB 0014-1327Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C2550If an ADF is used, be sure to execute P-PRINT of service mode to obtain itsprintout:COPIER>FUNCTION>MISC-P>P-PRINT5.4.2.2 Before Removing the Reader Controller PCB 0014-1332Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C25501) Detach the copyboard glass. (page 5-20)[Removing the CopyboardGlass]2) Detach the reader rear cover. (page 10-20)[Detaching the Reader RearCover]5.4.2.3 Removing the Reader Controller PCB 0014-1328Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C25501) Remove the cover.F-5-412) Disconnect the connector [1], and detach the flat cable [2].Be careful not to lose the ferrite core [3].When attaching, make sure to place it in the indicated position.F-5-423) Remove the cover [3].-8 screws [2]F-5-434) Disconnect the 2 connectors [1], and detach the 4 edge/wire saddles [2];then, remove the 2 screws [3].F-5-445) Go to the back of the machine, and free the cable from the 5 edge/wire sad-dles [1]; then, disconnect the connector [2].F-5-45DF-RG002
