Chapter 1717-5117.5 FUNCTION (Operation/Inspection Mode)17.5.1 COPIER17.5.1.1 COPIER Table 0013-9278Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iRC25501. INSTALL T-17-41COPIER>FUNCTION>INSTALLSub item Description level.STIR-4 This mixes the developing solutions inside the developers of all the colors.The Y, M, C and Bk developers are raced for two minutes to ensure that the developing solutions are mixed. 1STRD-POS Automatic detection of CCD scanning position in DF stream reading 1CARD Used to make card reader installation settings.Setting values1 to 2001 [Factory default/After RAM clear: 1]Operation method Enter the number of cards to use. (You can use up to 1,000 cards from the entered number.)Initialize the card management information.- Initialize the card name (department ID) (from the entered number).- Initialize the card's password.1KEY Used to set management key function recognition.Setting values0: Don't recognize management key function (value at time of factory shipment).1: Recognize management key function.Operation method1) Select COPIER > INSTALL > KEY, then enter '1'2) Turn the main power switch OFF/ON (the management key function is now recognized).1AINR-OFF Walm-up-rotation disable setting at initial installationThis disables the initialization of the P-CRG which is performed when a new P-CRG has been inserted. It prevents thefuse from blowing when the P-CRG initialization has been completed.It is used when replacing the P-CRG and checking the images in situations when, for instance, the causes of trouble areidentified. When it is set to "1," the initialization is canceled and the fuse is not blown even when a new P-CRG has beeninserted.Settings0: Initialization is performed when a new unit is inserted. The fuse is blown.1: Initialization is not performed when a new unit is inserted. However, the fuse is melted after the 100 page print andthe set in service mode goes "0".[Factory setting/value after clearing RAM: 0]1E-RDS E-RDS settingsSetting values0: Not in use1: In use[Factory settings and after RAM clear: 0]1RGW-PORT Specify port number of sales company server used in E-RDSSetting range: 1 to 65535[Factory settings and after RAM clear: ]1COM-TEST Check connection with sales company server used in E-RDSChecks sales company server connection. Judges whether connection can be made and displays the results as OK orFAIL.1COM-LOG Display detailed results of communication test with sales company server used in E-RDSDisplays information on any errors that have occurred in connection with sales company server. 1RGW-ADR Specify URL of sales company server used in E-RDSSets sales company server URL. 1CNT-DATE Set timing of counter transmission to serverSets time and date for start of transmission of counter information to server, via E-RDS third party extension function.Setting range: YYYYMMDDHHMM (YYYY: year, MM: month, DD: date, HH: hours, MM: minutes)[Factory settings and after RAM clear::000000000000]NoteThis item is only displayed when the E-RDS third party extension function is enabled.Set timing of counter transmissionto serverSets time and date for start of transmission of counter information to server, via E-RDS third party extension function.Setting range: YYYYMMDDHHMM (YYYY: year, MM: month, DD: date, HH: hours, MM: minutes)[Factory settings and after RAM clear:: 000000000000]NoteThis item is only displayed when the E-RDS third party extension function is enabled.1CNT-INTV Set interval of counter transmission to serverSets transmission intervals for transmission of counter information to server, via E-RDS third party extension function. 1INIT-Y Y color toner density signal (SGNL, REF) initial value readingThis is used when more than 100 sheets have passed through in error with a new CRG used in investigating imagedefects, etc.2INIT-M M color toner density signal (SGNL, REF) initial value readingThis is used when more than 100 sheets have passed through in error with a new CRG used in investigating imagedefects, etc.2
