Chapter 22-2- DADF-L1 + Finisher-Z1 + Paper Deck-Z1F-2-3- DADF-L1 + Saddle Finisher-Y2 + Puncher Unit-L1/M1/N1/P1 + Buffer Pass Unit-E2 + Paper deck-Z1F-2-47) The machine must be placed in a well ventilated area. It is important to make sure, however, that the machine is not near the air vent (for suction) of the room.2.1.2 Check to Make Before Installation 0013-8398Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iRC2550Be sure to go through the following before starting the work:1) If you are installing the machine after moving it from a cold to warm location, be sure to leave the machine unpacked for at least 2 hours so that the machine isfully used to the site temperature, thus avoiding image faults caused by condensation.(The term "condensation" refers to the formation of droplets of water on the surface of a metal object brought in from a cold to warm place, i.e., as the result ofthe rapid cooling of the moisture (vapor) around the object.)2) The machine weighs a maximum of about 125 kg (including a DADF). Be sure to work in a group of 4 persons when lifting it.Also, lift the main body while keeping it level.2.1.3 Combination Table of Accessory Installation 0014-5103Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iRC2550T-2-1yes: Available no: UnavailableThe following table shows the combination of accessories that are set at the right side of the host machine.When setting the accessories indicated in the table, refer to the table below and check the combination before the setup.Document Tray-J1 Voice Guidance Kit-B1* Voice Operation Kit-A1* Card Reader-C1Document Tray-J1 - no no yesVoice Guidance Kit-B1* no - no yesVoice Operation Kit-A1* no no - yesCard Reader-C1 yes yes yes -52" (1,320 mm)63" 3/8 (1,610 mm)4" (100 mm) or more19" 3/4 (500 mm)or more19" 3/4 (500 mm)or more19" 3/4 (500 mm)or more89" 1/4 (2,268 mm)52" (1,320 mm)4" (100 mm) or more19" 3/4 (500 mm)or more19" 3/4 (500 mm)or more19" 3/4 (500 mm)or more
