Chapter 77-52F-7-87After attaching the transfer cleaner unit, make sure to check visually that thescraper sheet is not folded at the both side of the transfer cleaner unit.If the scraper sheet is folded, push the scraper sheet [2] with the paper foldedin three [1] etc.F-7-887.9.7.3 Points to Note When Replacing the TransferCleaner Unit 0015-6942Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C2550When replacing the transfer cleaner unit, make sure to apply the lubricant(cefbon) to the scraper sheet.7.9.8 Secondary Transfer External Roller7.9.8.1 Removing the Secondary Transfer Outer Roller 0014-1321Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iRC3080i / iR C25501) Open the right cover.2) Remove the transfer separation guide [1].- 2 screws [2]F-7-893) Detach the plate [1].- 2 screws [2]F-7-904) Remove the shaft retainer [1].- 1 screw [2]F-7-915) Pick the tabs [2] of the both edges to remove the secondary transfer outerroller [1].[2][1][3][1][2][1] [2][2][1] [2][2][1][2]
