6.1.7.6 JC - Conditional jump 3866.1.7.7 LB - Jump label 3916.1.7.8 MR - Master reset 3936.1.7.9 NC - Numerical converter 3976.1.7.10 ST - SET cycle time 4036.2 Interrupt function blocks 4056.2.1 IC - Counter-controlled interrupt function block 4056.2.1.1 General 4056.2.1.2 Operating principle 4066.2.1.3 The function block and its parameters 4076.2.1.4 Other 4106.2.2 IE - Edge-controlled interrupt function block 4186.2.2.1 General 4186.2.2.2 Operating principle 4196.2.2.3 The function block and its parameters 4206.2.2.4 Other 4226.2.3 IT - Time-controlled interrupt function block 4246.2.3.1 General 4246.2.3.2 Operating principle 4246.2.3.3 The function block and its parameters 4266.2.3.4 Other 4286.3 UF - User function block 4326.3.1 General 4326.3.1.1 General information on user function blocks 4336.3.2 Creating a user function block 4336.3.3 Configuring a user function block 4356.3.4 Programming a user function block 4396.3.5 Calling a user function block in the main program 4406.3.5.1 User function blocks in an ST main program 4446.3.6 Saving a user function block 4456.3.6.1 Programming view tabs 4476.3.7 Exporting a user function block 4476.3.7.1 Plausibility check 4486.3.8 Importing a user function block 449easyE4 11/18 MN050009 EN www.eaton.com 7
