7. System settings7.2 View7.2 ViewThis menu can be used to configure the settings for the display.LIGHTING1 100LIGHTING2 50TIMEOUT: 10mCOLOR: 0Table 66: System Option-s\System\DisplayBRIGHTNESS1 Display brightness when the device is being operatedDefault value: 100,can be changed in increments of 10BRIGHTNESS2 Brightness for sleep modeDefault value: 50,can be changed in increments of 10Value: 0 will cause the display to be switched off in sleep modeTIMEOUT Used to set the time in minutes or secondsafter which the display will go to sleep if the easyE4 is not being actively operatedPAINT Relevant to easyE4 remote operationColor value of 0 – 15,This setting will affect the way the device is displayed, e.g., in easySoft 7 or on theweb server7.3 Device IDUsed to set / enter the individual device IDs for transferring programs.DEVICE IDxxx xxx xxxTable 67:SYSTEM OPTIONS\DEV-ICE IDEntering a device ID of <000 000 000> will disable the device ID check and theprogram ID check. If you do this, it will be possible to transfer all program typesto the base device through a microSD memory card or through easySoft 7regardless of whether an ID has been set in the program itself.easyE4 11/18 MN050009 EN www.eaton.com 461
