1. easyE4 control relays description1.10 Safety regulations1.10 Safety regulations1.10.1 BasicsThe device has been designed according to the state of the art and all generally accep-ted safety rules and standards. However, this alone cannot eliminate all potential haz-ards, which is why it is necessary for you to be aware of all hazards and residual risks.Do not run the device unless it is in perfect technical condition. Make sure to alwaysoperate it as specified in this document and for the intended purpose.Follow the safety instructions for the easyE4!The section on safety instructions must be read and understood byeveryone who will be working with the easyE4 before the actual work isperformed.NOTICEPay attention to the hazard severity levels used throughout this doc-umentation whenever a hazard is indicated. The hazard symbol and sig-nal word used and the corresponding text will provide informationregarding the specific hazard and how to avoid or prevent it.1.10.2 Mandatory requirements, personnel requirements1.10.2.1 Occupational safetyAll generally accepted occupational health and safety rules and standards (internal andnational) must be complied with, as must be all applicable laws and regulations in therelevant country.1.10.2.2 Personnel qualificationsThe personnel responsible for installation, operation, maintenance, and repairs musthave the necessary qualifications for the work they will be performing. They must beappropriately trained and/or briefed and be informed of all hazards and risks associatedwith the device.easyE4 11/18 MN050009 EN www.eaton.com 29
