4. Operation4.6 Transfer program to the easyE4 device4.6 Transfer program to the easyE4 deviceThere are two options for directly transferring a finished .e70 program to an easyE4device.l With a microSD memory cardl With a direct Ethernet connection between the PC and easyE44.6.1 Transfer with a microSD memory cardPrerequisitesl You will temporarily need a suitable microSD memory card with a maximum stor-age capacity of 2 GB.l A PC on which the easySoft 7 programming software is installed, → Section"Installation instructions", page 71Insert the microSD memory card into a drive on your PC (with a suitable adapter ifnecessary).Open the easySoft 7 programming software on your PC.Create an application program and save itorOpen a sample program.If necessary, use the help in the menu by accessing the help topics with the F1 keyor open the easyE4 manual.Application examplesA number of applications are available for download from theproduct page at http://www.eaton.eu/easy.These examples come with a description, the circuit diagram,and the easySoft 7 project (in the EDP and LD programming lan-guages as of this writing).The appendix contains a sample program that can be opened via a hyperlink, → Section"Sample Projects", page 588Make sure to stay in the Project view, as the Project menu willonly be available there.Click on the Project\ Card... menu option.114 easyE4 11/18 MN050009 EN www.eaton.com
