7.14.1 Configuring the password on a base device with a display 4767.14.1.1 What happens if you forget your password or enter the wrongpassword? 4787.14.2 Configuring the password in easySoft 7 4797.15 Configuring the memory card and device ID 4817.16 Time and Date setting 4827.16.1 Time and date on a base device with a display 4827.16.2 Setting time and date in the easySoft 7 4848. microSD memory card 4878.1 Automatic booting from the card 4888.1.1 Preparing the card in the PC for booting with easySoft 7 4888.1.2 Preparing the card in the easyE4 device for booting witheasySoft 7 4918.1.3 Preparing the card for booting on the easyE4 device itself 4958.2 Reset – resetting the device to factory settings 4978.3 Loading new operating system 4988.4 Setting a splash screen for the EASY-E4-...-12...C1 display 5009. easyE4 inside 5019.1 Program execution 5019.2 Transfering an existing circuit diagram 5049.3 Timing characteristics of expansion devices 5059.4 Time behavior of the inputs and outputs 5069.4.1 Delay time on EASY-E4-DC-... devices 5079.4.1.1 Delay time with DEBOUNCE activated 5079.4.1.2 Delay time with DEBOUNCE deactivated 5089.4.2 Delay time on EASY-E4-UC-... devices 5099.4.2.1 Delay time with DEBOUNCE activated 5099.4.2.2 Additional delay time due to bouncing pushbuttons 5109.5 Device information 5119.6 Operating states 5129.7 NET network 51310. Diagnostics messages of the operating system 51710.1 Transistor outputs (overload / short circuit) 518easyE4 11/18 MN050009 EN www.eaton.com 9
