8. microSD memory card8.4 Setting a splash screen for the EASY-E4-...-12...C1 display8.4 Setting a splash screen for the EASY-E4-...-12...C1 displayYou can create your own custom monochromatic image externally in any program. Sim-ply make sure that the image is in BMP format and is named boot.bmp.The size is set at 128 x 96 pixels (width x height) or, alternatively, 128 x 64 pixels. Youcan use two colors, which will be shown as shades of gray.Make sure that the file always keeps the name boot.bmp!Splash screenFigure 235: boot.bmpTransfer the image to the microSD memory card.Store the boot.bmp file directly on the memory card.microSD memory card on the PCFigure 236: Storing the boot.bmp fileAs soon as the easyE4 device is switched on,the boot.bmp will be shown as a splash screen for the defined duration.In order for the splash screen to keep working, the microSDmemory card must remain in the device.See also→ Section "Transfer program to the easyE4 device", page 114→ Section "Transferring programs from and to a memory card", page 150→ Section "Overview of switch-on behavior", page 85→ Section "DL - Data logger", page 380500 easyE4 11/18 MN050009 EN www.eaton.com
