AppendixList of FiguresList of FiguresFigure 1: Devices with display and button controls 22Figure 2: Devices with LED indicators used for diagnostics 22Figure 3: Device models in 4SU 23Figure 4: Device models in 2SU 23Figure 5: Mounting distance min. 3 cm 42Figure 6: Assembling a base device with expansions 43Figure 7: Installation on IEC/EN 60715 mounting rail 44Figure 8: Inserting a fastening bracket. 46Figure 9: Screw mounting configuration for a device 46Figure 10: Remove adjacent connectors 47Figure 11: Dismantling 47Figure 12: Screw length stripping length 48Figure 13: Connecting the power supply 49Figure 14: Connect digital inputs 50Figure 15: Connect digital counter inputs 51Figure 16: Connecting analog inputs 52Figure 17: Connecting relay outputs 54Figure 18: Connecting base device transistor outputs 55Figure 19: Connecting expansion device transistor outputs 55Figure 20: Inductive load with suppressor circuit 56Figure 21: Device parameters tab 58Figure 22: Connecting analog inputs EASY-E4-DC-6AE1 58Figure 23: Connecting analog outputs EASY-E4-DC-6AE1 59Figure 24: Slot for microSD 61Figure 25: Ethernet port on base device 61Figure 26: Inserting a memory card 62Figure 27: Removing the memory card 63Figure 28: RJ-45 socket, 8-pole 64Figure 29: Connecting the Ethernet cable 65Figure 30: Removing the Ethernet cable 65Figure 31: Figure: License product certificate 67easyE4 11/18 MN050009 EN www.eaton.com 601
