5. Programming on the device5.5 Transferring programs from and to a memory card5.5.1 Configuration on base devices with a displayThe program needs to be transferred using the Card menu option.In order to be able to do this, the program must be in STOP mode. If it is not, the devicewill point this out.Go to the main menu.Open the CARD menu option.STOP ✓ RUNPARAMETERSSET CLOCKCARDINFORMATIONSYSTEM-OPT.PROGRAMTable 57: Main menuThe device menu for the memory card will appear with additional menu options.PROGRAMLOG RECORDINGMANAGE SD CARDINFORMATIONTable 58: CardPROGRAM Used to manage the programs on the deviceLOGS Data can be written to a binary file by using the DL (Data Logger)manufacturer function block. These logs can be managed here.MANAGE CARD Used to format and eject the cardINFORMATION Provides information on the card size and the amount of freespace lefteasyE4 11/18 MN050009 EN www.eaton.com 151
