6. Function blocks6.3 UF - User function block6.3.10 Deleting a user function blockThis function can be used to delete user function blocks from easySoft 7. Please notethat you will only be able to delete user function blocks that are not being used in theproject and that are not open for editing. If there are no user function blocks that can bedeleted, the Program/Delete user function blocks... menu option will not be available.The following options are available for deregistering / deleting a user function block:1. Program/Delete user function blocks… menu option2. User function blocks folder in list of operands and function blocks/Delete userfunction blocks… context menu option3. List of operands and function blocks /Delete context menu optionThe following dialog box will appear if you use one of the first two options:Figure 212: Delete user function blocks dialog boxYou will get a list of all user function blocks that can be deleted, and can select any indi-vidual user function blocks you want. Once you select a function block and click on theDelete button, the function block will be deleted. After this, the user function block willno longer be part of easySoft 7 and will no longer be available in the list of operands andfunction blocks/User function blocks folder.If you use the third option, the user function block you selected will be deleted andremoved from the list of operands and function blocks/User function blocks folder.6.3.11 Comparing user function blocksThe "Compare user function blocks..." menu option will be enabled as soon as youselect a user function block. If the selected user function block is password-protected,you will have to enter the password.easyE4 11/18 MN050009 EN www.eaton.com 451
