5. Programming on the device5.6 Working with function blocksFunction, special function, parameterdisplayDisplays the func-tion blocks usedCurrent cursor lineFree memory in bytesFigure 93: Explanation of the function block listUse the cursor buttons to select the required function block fromthe function block list, in this case timing relay T01.Confirm the selection by clicking the OK button.The timing relay is displayed in the function block editor.5.6.3 Configuring parameters in the function block editorThe function block can be fully parameterized in the function block editor.This is accessed via the function block list.Access is blocked if the program is password protected.Action Unit/special functionFunction block num-berFunction block nameParameter display (+ appears/ –does not appear)Basic parametersFunction blockinputsVariable,operand for inputsFunction block out-putsVariable, operand for outputsFigure 94: Manufacturer function block display in the function block editoreasyE4 11/18 MN050009 EN www.eaton.com 157
