7. System settings7.4 Boot logo7.4 Boot logoOnce an boot.bmp image is stored on the microSD memory card, this setting can beused to specify how long the image will be displayed, in seconds, before the status dis-play is shown.DISPL. DURATION3 sTable 68: System Option-s\Boot Logo7.4.1 Image as on the displayYou can create your own custom monochromatic image externally in any program. Sim-ply make sure that the image is in BMP format and is named boot.bmp.The size is set at 128 x 96 pixels (width x height) or, alternatively, 128 x 64 pixels. Youcan use two colors, which will be shown as shades of gray.Make sure that the file always keeps the name boot.bmp!Splash screenFigure 224: boot.bmpTransfer the image to the microSD memory card.Store the boot.bmp file directly on the memory card.microSD memory card on the PCFigure 225: Storing the boot.bmp fileAs soon as the easyE4 device is switched on,the boot.bmp will be shown as a splash screen for the defined duration.In order for the splash screen to keep working, the microSDmemory card must remain in the device.462 easyE4 11/18 MN050009 EN www.eaton.com
