Configuring WSS System Parameters 181Nortel WLAN—Management Software 2300 Series Reference Guide7 Click Finish.Changing a Port Group1 In the Content panel, select the row for the port group.2 Click Properties.The Port Group Properties wizard appears.3 To add a port to the port group, select the Member checkbox for the port. The port group name appears inthe Port Group column for the port.4 To remove a port from a port group, clear the Member checkbox for the port.5 To change the membership of a port that is in another port group, select the Member checkbox for theport.The Port Group Member Remove dialog box appears. Click Yes to change the port’s membership. ClickNo to leave the membership unchanged.6 Click Finish.Viewing and Changing Management SettingsViewing Management Service Settings1 Select the Configuration tool bar option.2 In the Organizer panel, click the plus sign next to the WSS.3 Click the plus sign next to System.4 Select Management Services.The management services and their settings appear in the Content panel.Changing Management Service Settings1 To enable or disable a management service, select or deselect it by clicking the checkbox next to theservice name.For example, to enable Telnet, click the checkbox to place a checkmark in the box.You can individually enable or disable the following management services:Note. By default, HTTPS is enabled on the WSS, allowing you to use Web View on port443 for a secure session. If you disable HTTPS, you cannot use Web View. WLANManagement Software communications also use HTTPS, but WLAN ManagementSoftware is not affected by the HTTPS configuration on the WSS. For WLAN ManagementSoftware, HTTPS is always enabled and listens on port 8889.
