64 Working with Network PlansNN47250-102 (320666-G Version 02.01)To import a plan:1 Select Services > Plan Management to access the WLAN Management Software PlanManagement page.2 Click Import Plan in the left column to display the Import Plan page.3 Select the network plan you want to import, from the Plan drop-down list.WLAN Management Software compares the object names in the plan to be imported with theobject names in the open plan. If both plans have objects of the same name and type, the objectsare listed and Conflict appears in the Status column.4 Do one of the following, depending on whether you want to import all objects from the plan:• If you do not want to replace the objects in the open plan with their like-namedobjects in the other plan, click Cancel. WLAN Management Software does notimport any objects from the plan.• If you do want to replace the objects, click Import. WLAN Management Softwareimports the objects into the open plan.Closing a Network PlanYou can close a network plan at any time. If you have unsaved changes, you are asked whether you want tosave the changes.To close a network plan:1 In the main WLAN Management Software window, select File > Close or File > Exit.If the network plan has no unsaved changes, the network plan is closed. Otherwise, go to thenext step.2 If there are unsaved changes, WLAN Management Software displays a dialog asking whetheryou want to save the changes, discard them, or cancel the request to close the plan or exit theapplication. Do one of the following:• Select Apply to save the changes and close the plan.• Select Discard to close the plan without saving the changes.• Select Cancel to cancel the request to close the plan or exit the application, andcontinue working with the plan.Deleting a Network PlanYou can delete a network plan at any time.Note. You cannot delete the currently active plan. To delete the active plan, first use theSwitch Plan page to select another plan to be active, then delete the plan.
