Changing WLAN Management Software Services Preferences 465Nortel WLAN—Management Software 2300 Series Reference Guide6 The change the UDP port on which WLAN Management Software Services listens for SNMP traps, typeor select the port number in the HTTPS Server Port box. The default is 162.7 To enable WLAN Management Software Services to receive traps, select one or both of the followingtrap types:• SNMP V1 Traps• SNMP V3 Traps8 To enable WLAN Management Software to reuse a switch configuration to replace an old switch with anew one, select Auto-Config IP Subnet Matching.(For more information about this option, see “Replacing a switch and reusing its configuration”(page 318).)9 To change the name of the key store file that contains the encryption keys WLAN Management SoftwareServices uses for authentication with WLAN Management Software, edit the name in the File box. Thedefault name is .rmservices_keystore.10 To change the password that protects access to the key store file, edit the value in the Password box.11 To specify the file type for the key store file, select one of the following:• PKCS12—Public-Key Cryptography Standard number 12, the standard format used by Linuxmachines.• JKS—Java Key Store, a format used by Java platforms and applications.12 To restrict access to WLAN Management Software, see “Restricting Access to WLAN ManagementSoftware” (page 55).13 Click another tab to configure more settings or click Close to close the WLAN Management SoftwareServices Setup dialog box.Changing WSS Connection SettingsThe WSS connection settings control the timeout and retries for connections with monitored WSSs, and the types ofcertificates the service will accept from the switches.To change WSS connection settings1 Select Services > Setup or select the browser window if WMS Services is already open. (See Figure 1 onpage 458.)Note. You also must add WLAN Management Software Services as anotification target on each WSS. WLAN Management Software Services does notstart listening for SNMP notifications from a WSS until you add WLANManagement Software Services as an SNMP notification target to the switch. (Toconfigure WLAN Management Software Services as a switch’s notification target,see “Configuring WLAN Management Software Services as a Notification Target”(page 188).)
