236 Configuring Wireless ParametersNN47250-102 (320666-G Version 02.01)3 Edit the service name in the Name field.Editing the name is optional if this is the first service of this type configured on the switch.4 Type the SSID name in the SSID field.5 Select Bridging to allow the AP to act as a bridge for wireless traffic destined for a wired network. ClickNext.6 Select MAC Address to authenticate using the AP MAC address. Or, select Open Access to allow any APto authenticate using a preshared key. Click Next.Using a MAC Address for Authentication7 Enter the MAC address of the Mesh AP or select an existing MAC address from the list. If you create aMAC address user, enter the MAC address and select Finish.8 Click Next.9 Enter a preshared key in the Preshared Key field. Click Generate to generate a hexadecimal key. Youshould set this key in the boot configuration of the AP. Click Next.10 From the Radio Profile list, select the appropriate radio profile.11 Click Finish to complete the configuration.Using a Preshared Key for Authentication12 Select Open Access as the Authentication type, and click Next.13 Enter a preshared key in raw hexidecimal format. Or, enter a passphrase into the Preshared Key field andclick Generate to obtain the hexidecimal format. You should set this key in the boot configuration of theAP.14 Click Finish to complete the configuration steps.Configuring a Custom ServiceIf none of the other service types is appropriate, you can use the Custom Service Profile wizard to configure the service.The screens and options that are displayed depend on the access types and other elections you make as you use thewizard. All pages and options occur in at least one of the other service profile wizards. For information, see the proce-dures for the other wizards.Modifying Service Profile SettingsYou can modify the following service profile settings in the Wireless Service Profiles table itself:• SSID name• SSID type (encrypted or clear)• Beacon state (advertisement of the SSID)• Radio profile (maps AP radios to the service profile)To view or change other settings, select the service profile in the Wireless Service Profiles table and click Properties. Adialog with the following tabs is displayed:• Service Profile• WPA, RSN
