Configuring Wireless Parameters 231Nortel WLAN—Management Software 2300 Series Reference Guidea Select Create new Radio Profile and click Next.b Type the radio profile name in the Name box and click Next.c Select the radios you want to manage with the radio profile and click Move to move them to theCurrent Members list.d Go to step 23.23 Click Finish.The service profile appears in the service profile table.Configuring a Web-Portal (Web-based AAA) Service1 Access the Web-Portal Service Profile wizard:a In the Organizer panel, click on the plus sign next to the WSS on which you want to configure theservice profile.b Click on the plus sign next to Wireless.c Select Wireless Services.d In the Task List panel, select Web-Portal Service Profile.2 Read the description of the wizard on the first page, then click Next.3 Edit the service name in the Name box.Editing the name is optional if this is the first service of this type you are configuring on the switch.4 Type the SSID name in the SSID box.5 Select the SSID type:• Encrypted—Traffic on the SSID is encrypted.• Clear—Traffic on the SSID is unencrypted.6 Click Next.• If you selected Encrypted in step 5, configure the encryption settings. Go to step 7.• If you selected Clear in step 5, go to step 15.7 Select the security modes you want the SSID to support. You can select one or more of the following:• RSN (WPA2)• WPA• Static WEP8 Click Next.Note. If you have not planned RF coverage or configured any APs in the networkplan yet, no radios are listed. You can add the radios later. (Select the radio profile,click Properties, then select Radio Selection. See “Configuring Advanced RadioProfile Settings” (page 247).)
