328 Managing WSS System Images and ConfigurationsNN47250-102 (320666-G Version 02.01)Synchronizing when the Network and WLAN Management Software haveNonmatching ChangesIf a WSS in the network has configuration changes, and the switch’s counterpart in the network plan also has changesbut the changes are different, you still can synchronize the changes.The Devices tab indicates that both the network and the network plan have nonmatching changes in the following ways:• When you select the WSS, the links in both the Local Changes and Network Changes groups of the Task List panelbecome active.• When you click Deploy, the deployment is not performed and the following message is displayed instead: wss is notsynchronized.To synchronize the changes, do one of the following:• Review and either deploy (local changes) or accept (network changes), then review and either deploy or accept theother set of changes.• Reject one set of changes (local or network) and accept or deploy the other set of changes.• Reject both sets of changes.Distributing System ImagesYou can use WLAN Management Software to upgrade or downgrade the system image (WSS Software software) onWSSs. System images include switch software and AP software.Using the Image RepositoryUse the image repository to add or delete WSS system images. The image file is checked and its version is verified whenadded to the image repository. Images are stored in the WLAN Management Software_installation_directory\images\dpdirectory.To add a system image1 Select the Devices tool bar option.2 At the bottom of the Task List panel, select Device Operations.3 In the Task List panel, select Image Repository.4 Click Add Image. The Add to Repository dialog box appears.5 Navigate to the directory containing the system image.6 Select the system image.7 Click Add to Repository. The image is added to the image repository and appears in the Image List.8 To close the Image Repository dialog box, click Close.
