Generating Reports 379Nortel WLAN—Management Software 2300 Series Reference Guide4 Select the scope type of the report from the Report Scope Type drop-down list:• Mobility Domain• WLAN—Security Switch• Site• Building• Floor• Coverage Area5 Select the instance for which you want the report. For example, if the scope is Building, select thebuilding.6 Click Next.7 When the report is generated, click the report link to view it.The client summary report contains the following sections:• Session Summary• Total Num Sessions• Average SNR• Average RSSI• SSID Summary• Access Type Summary• Top Bandwidth Sessions• Low RSSI Sessions• Low SNR SessionsGenerating a Client Details ReportThe client details report lists details about current client sessions.To generate a client details report1 Select the Reports tool bar option.2 In the Reports list, select Client Details.3 Click Generate.4 Click Add to add a report filter. The filter configuration fields are activated.Note. The data for this report comes from WLAN Management Software Services. TheEnable client session collection option, located in the Client Monitor group box of theMonitoring Settings tab, must be enabled. (See “Changing Monitoring Settings”(page 466).)
