386 Generating ReportsNN47250-102 (320666-G Version 02.01)• Mobility Domain• Site• Building• Floor5 Select the instance for which you want the report. For example, if the scope is Building, select thebuilding.6 Select the time period for the report:• 1 Hour• 24 Hours• 7 Days• 30 Days7 To specify the rogue type, click on the Value field in the Report Filter area of the dialog, and select one ofthe following from the drop-down list:• Rogue• Interfering• Ad-hoc• All (This option displays all three types: rogue, interfering, and ad-hoc.)The default is Rogue.8 Click Next.9 When the report is generated, click the report link to view it.The report lists the BSSIDs of the rogues detected by each WSS. The report also shows graphs of the distribution ofrogues on the WSSs, and of trend data.Generating an Alarm SummaryThe alarm summary report provides a summary of alarms.To generate an alarm summary report1 Select the Reports tool bar option.2 In the Reports list, select Alarm Summary.3 Click Generate.4 Select the scope type of the report from the Report Scope Type drop-down list:• Network Plan• Mobility Domain• Site• Building
