326 Managing WSS System Images and ConfigurationsNN47250-102 (320666-G Version 02.01)• Selecting Review in Local Changes displays changes made in WLAN ManagementSoftware.• Selecting Review in Network Changes displays changes that have occurred in thenetwork.5 To print the changes, click Print.6 Click Close to return to the Managed Devices tab.Accepting Network Changes1 Select the Devices tool bar option.2 At the bottom of the Task List panel, select Change Management.3 Select one or more WSSs.To select multiple switches, press Shift (for contiguous switches) or Control (fornoncontiguous switches) while clicking.4 In the Task List panel in the Network Changes group, click Accept.The status is shown in the Network Status and Local Status columns.Undoing Local or Network Changes1 Select the Devices tool bar option.2 At the bottom of the Task List panel, select Change Management.3 Select one or more WSSs.To select multiple switches, press Shift (for contiguous switches) or Control (fornoncontiguous switches) while clicking.4 In the Local Changes or Network Changes group in the Task List panel, select Undo.• Selecting Undo in Local Changes reverses changes made in WLAN ManagementSoftware.• Selecting Undo in Network Changes reverses changes that have occurred in thenetwork.The status is shown in the Network Status and Local Status columns.Deploying Switch Configuration ChangesYou can deploy changes immediately or schedule them to be deployed later.When you deploy changes to a WSS, all of the changes are sent as a single transaction. If any parameter isunsuccessfully changed, the entire transaction is rolled back. If the transaction is successful, the configurationchanges are immediately and dynamically put into effect. (A reboot is not required.)The following procedures provide steps for deploying configuration changes from the Devices tab. You alsocan immediately deploy changes from the Configuration tab, by clicking Deploy.
