Planning the Nortel WLAN 2300 System 81Nortel WLAN—Management Software 2300 Series Reference Guide4 In the Site Name box, type a name for the site (1 to 80 alphanumeric characters, with no spaces or tabs).5 To change the Country Code, select Setup Country Code in the Task List panel, then in the ChangeCountry Code dialog, select the country where the network is to be deployed.6 In the Channel Set (802.11b/g) list, select the set of operating channels for any 802.11b/g AP radios youplan to use (if different from the default).From the Content panel, you can also change the properties of existing buildings at the site. See “Creating or ModifyingBuildings in a Site” (page 81) next for more information.Creating or Modifying Buildings in a SiteTo create or modify a building1 Select the RF Planning tool bar option.2 In the Organizer panel, click the site name.3 Do one of the following:Note. For Series 2332 access points, be sure that the selected country code issupported by the associated model before changing to it. If the country code is notsupported, the Series 2332 access point will not operate and an error will begenerated. For a complete listing of the Series 2332 access point models and theirassociated countries please visit the Nortel Support website:http://www.nortel.com/support.
