2.7 Install the Keypad on the Control Panel or Other Devices38 YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual■ Mount to Exterior of Control Panel1. Cut an opening in the control panel for the keypad.Refer to the following figure for the panel cut-out dimensions.Figure 2.9 Panel Cut-Out Dimensions for Mounting to Exterior of Control PanelTable 2.7 Panel Cut-out Dimensions mm (in.)W H W1 H1 H2 H3 d22(0.89) 78(3.07) 22(0.89) 29(1.14) 22(0.89) 1(0.04) 3.6(0.14)2. Remove the keypad and place the keypad connector in the holder on the front cover.Note:Insert the keypad connector in the direction of the hooks.A - KeypadB - Keypad connectorC - HolderFigure 2.10 Remove the Keypad3. Position the keypad to the outside of the control panel, and mount it from the inside using the screws.Use M3 screws (6 mm depth cross recessed pan head screws) and tighten them to a tightening torque of0.49 to 0.73 N∙m (4.34 to 6.46 lb.∙in.).
