Parameter List1010.10 H: Terminal FunctionsYASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual 451No.(Hex.) Name Description Default(Range) Ref.H2-10(0B3D)MEMOBUSRegister 2 BitSelect Configures the bit of the MEMOBUS/Modbus register output to theMFDO terminal.0000(0000 - FFFF)780H2-20(1540)Comparator 1Monitor Selection Configures the monitor number for comparator 1. Configure the x-xx portion of Ux-xx [Monitor]. For example, set x-xx to 102 tomonitor U1-02 [Output Frequency].102(000 - 999)780H2-21(1541)Comparator 1Lower Limit Configures the lower limit detection level for comparator 1 on thebasis that the full scale analog output for the monitor numberselected with H2-20 [Comparator 1 Monitor Selection] is the 100%value.0.0%(0.0 - 300.0%)781H2-22(1542)Comparator 1Upper Limit Configures the upper limit detection level for comparator 1 on thebasis that the full scale analog output for the monitor numberselected with H2-20 [Comparator 1 Monitor Selection] is the 100%value.0.0%(0.0 - 300.0%)781H2-23(1543)Comparator 1Hysteresis Configures the hysteresis level for comparator 1 on the basis that thefull scale analog output for the monitor number selected with H2-20[Comparator 1 Monitor Selection] is the 100% value.0.0%(0.0 - 10.0%)781H2-24(1544)Comparator 1 On-Delay Time Configures the comparator 1 on delay time.0.0 s(0.0 - 600.0 s)781H2-25(1545)Comparator 1 Off-Delay Time Configures the comparator 1 off delay time.0.0 s(0.0 - 600.0 s)781H2-26(1546)Comparator 2Monitor Selection Configures the monitor number for comparator 2. Configure the x-xx portion of Ux-xx [Monitor]. For example, to monitor U1-03[Output Current], set a value of 103.103(000 - 999)782H2-27(1547)Comparator 2Lower Limit Configures the lower limit detection level for comparator 2 on thebasis that the full scale analog output for the monitor numberselected with H2-26 [Comparator 2 Monitor Selection] is the 100%value.0.0%(0.0 - 300.0%)782H2-28(1548)Comparator 2Upper Limit Configures the upper limit detection level for comparator 2 on thebasis that the full scale analog output for the monitor numberselected with H2-26 [Comparator 2 Monitor Selection] is the 100%value.0.0%(0.0 - 300.0%)782H2-29(1549)Comparator 2Hysteresis Configures the hysteresis level for comparator 2 on the basis that thefull scale analog output for the monitor number selected with H2-26[Comparator 2 Monitor Selection] is the 100% value.0.0%(0.0 - 10.0%)782H2-30(154A)Comparator 2 On-Delay Time Configures the time for the monitor number configured with H2-26[Comparator 2 Monitor Selection].0.0 s(0.0 - 6000.0 s)782H2-31(154B)Comparator 2 Off-Delay Time Configures the time for the monitor number configured with H2-26[Comparator 2 Monitor Selection].0.0 s(0.0 - 600.0 s)783H2-40(0B58)Extend MFDI1Function Selection Configures the MFDO assigned to bit 0 of MEMOBUS register15E0 (Hex.).F(0 - 1A7)783H2-41(0B59)Extend MFDI2Function Selection Configures the MFDO assigned to bit 1 of MEMOBUS register15E0 (Hex.).F(0 - 1A7)783H2-42(0B5A)Extend MFDI3Function Selection Configures the MFDO assigned to bit 2 of MEMOBUS register15E0 (Hex.).F(0 - 1A7)783V/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLV
