Parameter List1010.5 b: ApplicationYASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual 407No.(Hex.) Name Description Default(Range) Ref.b5-40(017F)FrequencyReference Monitor@PID Selects the contents displayed in monitor U1-01 [Freq Reference]when using PID control.0 : with PID1 : without PID0(0, 1)629b5-47(017D)PID OutputReverse Selection2 Sets whether or not the motor should rotate in reverse when the PIDcontrol output is negative.0 : Disabled: 0 lower limit1 : Enabled: Negative lower limit1(0, 1)630b5-53(0B8F)RUNIntegrator RampLimit Adjusts the responsiveness of PID control when the PID feedbackchanges rapidly.0.0 Hz(0.0 - 10.0 Hz)630b5-54(0BB7)PID softstartercancel selection Selects the relationship between the soft starter and PID input/output.0 : None1 : Softstarter is canceled0(0, 1)630b5-55(0BE1)PID feedbackmonitor selection Selects the monitor (Ux-xx) used as the PID Feedback.000(000 - 999)630b5-56(0BE2)PID feedbackmonitor gain Configures the gain for the monitor selected with b5-55 [PIDfeedback monitor selection].1.00(0.00 - 10.00)631b5-57(11DD)PID FeedbackMonitor Bias Configures the bias for the monitor selected with b5-55 [PIDfeedback monitor selection].0.00(-10.00 - +10.00)631b5-58through b5-60(1182 -1184)RUNPID Setpoints 2through 4 Configures the PID setpoint selected with H1-xx = 3E or 3F[Terminal Sx Function Select = PID Setpoint Selection 1/2]. Thisparameter is configured on the basis of the maximum outputfrequency being the 100% value.0.00%(0.00 - 100.00%)631b5-61(119A)PID Trim lowerlimit selection Configures the function used to adjust the PID output in proportionwith the frequency reference.0 : Disabled1 : Enabled0(0, 1)631b5-62(119B)PID Trim lowerlimit Configures the lower limit of the PID frequency reference trim onthe basis of the maximum output frequency as the 100% value.0.00%(0.00 - 100.00%)632b5-63(119C)Differential PIDFeedback Select Selects the monitor (Ux-xx) used as the PID Differential Feedback.000(000 - 999)632b5-64(119D)Differential PIDFeedback Gain Configures the gain of the monitor configured with b5-63[Differential PID Feedback Select].1.00(0.00 - 10.00)632b5-65(119F)PID Diff FdbkMonitor Bias Configures the bias for the monitor selected with b5-63 [DifferentialPID Feedback Select].0.00(-10.00 - +10.00)632b5-66(11DE)PID feedbackmonitor Lvl Configures the signal level for the monitor selected with b5-55 [PIDfeedback monitor selection].0 : Absolute1 : +-0(0, 1)632b5-67(11DF)PID Diff Fdbkmonitor Lvl Configures the signal level for the monitor selected with b5-63[Differential PID Feedback Select].0 : Absolute1 : +-0(0, 1)633V/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLV
