11.8 H: Terminal Functions812 YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manualâ– 12: Regenerative Torque LimitSetting Function Description12 Regenerative TorqueLimit Inputs the regenerative torque limit assuming that the motor rated torque is 100%.Note:The lower torque limit is enabled when using both L7-01 through L7-04 and analog inputs to set torque limits for the same quadrant.â– 13: Torque Reference / Torque LimitSetting Function Description13 Torque Reference /Torque Limit Inputs the torque reference assuming that the motor rated torque is 100%. This parameter operatesas the torque limit for speed control.Note:The lower torque limit is enabled when using both L7-01 through L7-04 and analog inputs to set torque limits for the same quadrant.â– 14: Torque CompensationSetting Function Description14 TorqueCompensation Inputs the torque compensation value assuming that the motor rated torque is 100%.â– 15: General Torque LimitSetting Function Description15 General Torque LimitInputs the torque limit common to all quadrants for forward, reverse, and regenerative operationassuming that the motor rated torque is 100%.â– 16: Differential PID FeedbackSetting Function Description16 Differential PIDFeedback Inputs the PID differential feedback value assuming that the full scale analog signal (10 V or 20mA) is 100%.Calculates the PID input from the deviation between the PID feedback and the differential feedback value signals.â– 1F: Through ModeSetting Function Description1F Through ModeUse this setting when terminals are not used or to use terminals in through mode.If a terminal not used is set to 1F, the signal input to the terminal can be used as PLC analog signal input viaMEMOBUS/Modbus communications or the communication option. This input signal does not affect driveoperation. This functions the same as F (Through Mode).â– 30: DriveWorksEZ analog input 1Setting Function Description30 DriveWorksEZanalog input 1 Used with DriveWorksEZ. Refer to the DriveWorksEZ Online Manual for more information.â– 31: DriveWorksEZ analog input 2Setting Function Description31 DriveWorksEZanalog input 2 Used with DriveWorksEZ. Refer to the DriveWorksEZ Online Manual for more information.V/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLVV/f CL-V/f OLV CLV AOLV OLV/PMOLV/PM AOLV/PM CLV/PM EZOLV
