System ManagementUse this command cautiously, preferably under the guidance of technical supportpersonnel. Do not use this command before save command, which also cancels thesetting of the flag bit.For related commands, see delete, save, display current-configuration, displaysaved-configuration.Example# Set the flag bit to enter setup.[3Com] first-config set1.1.8 saveSyntaxsaveViewAll viewsParameterNoneDescriptionUsing the save command, you can save the current configuration file to Flashmemory or NVRAM.When a set of configurations has been completed and have implemented theintended functions, the current configuration files should be saved to Flash memory orNVRAM (in the 3Com series of routers, they will be saved to the storage mediaspecified by the configfile command).For related commands, see delete, download config, displaycurrent-configuration, display saved-configuration.Example# Save the system current configuration to the configuration file in Flash memory orNVRAM.[3Com] saveNow writing the running config to flash memory.Please wait for a while......11
