3Com Router Command Reference Guide — V1.006.1.17 display mfrSyntaxdisplay mfr [ interface mfr number | interface serial number ] [ detailed ]ViewAll viewsParameterinterface mfr number: Specific bundle interface for which the information will bedisplayed.interface serial number: Specific bundle link interface for which the information willbe displayed.detailed: Display MFR detailed information.DescriptionUsing the display mfr command, you can view statistics of specified MFR.For related commands, see link-protocol fr mfr, interface mfr.Example# Display the status information of all bundles and bundle links.[3Com]display mfrBundle interface:MFR0, Bundle State = up, Bundle Class = ABundle name = MFR0Bundle links:Serial0, PHY state = up, link state = up, Link name = Serial0# Display the detailed state information of MFR bundle link interface Serial 0.[3Com]display mfr interface serial0 detailSerial2, PHY state = up, link state = add sent, Link name = Serial2Bundle Link statistics:Add_link: sent packets = 40, rcv'd packets = 0,Add_link_ack: sent packets = 0, rcv'd packets = 0,Add_link_rej: sent packets = 0, rcv'd packets = 0,Remove_link: sent packets = 0, rcv'd packets = 0,Remove_link_ack: sent packets = 0, rcv'd packets = 0,Hello: sent packets = 0, rcv'd packets = 0,Hello_ack: sent packets = 0, rcv'd packets = 0,outgoing pak dropped = 0, incoming pak dropped = 0Bundle interface = MFR0, name = MFR0Cause code = differential delay, Ack timer = 4, Hello timer = 10,Max retry count = 2,104
