3Com Router Command Reference — V1.00Logic channel viewParametertype: Interface type.number: Interface number.priority: Priority of a standby interface, ranging from 0 to 255, being 0 by default. Thegreater the value is, the higher the priority is.DescriptionUsing the standby interface command, you can configure a certain physical interfaceas a standby interface for the main interface. Using the undo standby interfacecommand, you can cancel a specified standby interface.By default, no standby interface is specified.A certain physical interface can be specified as a standby interface. One maininterface can have multiple standby interfaces which will be used according to theirpriorities, that is, the standby interface with higher priority is preferred to being usedfirst.Example# Specify Serial 1 whose priority value is 50 as the standby interfaces for Serial 0.[3Com-Serial0]standby interface serial 1 501.1.4 standby logic-channelSyntaxstandby logic-channel number [ priority ]undo standby logic-channel numberViewInterface viewLogic channel viewParameternumber: Number of the logic channel4
