SecurityDescriptionUsing the display encrypt-card syslog command, you can view the current logconditions of the crypto cards.If the input slot-id is larger than the slot-number of the router, the system will prompt“Invalid encrypt-card slot-id”.For related commands, see encrypt-card set syslogExample# Display the current log conditions of the crypto card.[3Com] display encrypt-card syslog 0Date:2002-02-01,Time: 17:04:04 Encrypt-card 3 : receive time config cmdDate:2002-02-01,Time: 17:04:04 Encrypt-card 3 : receive add tdb cmdDate:2002-02-01,Time: 17:04:04 Encrypt-card 3 : receive add tdb cmd4.1.10 display encrypt-card versionSyntaxdisplay encrypt-card version [ slot-id ]ViewAll views.Parameterslot-id: The ID of the slot where the crypto card is located. The value range isdetermined by the number of the slots on the router. If no value is input, the operationwill be implemented on all the crypto cards.DescriptionUsing the display encrypt-card version command, you can view the current versionof the crypto card.This command is applicable to crypto cards.The displayed information includes the version of the firmware and PCB of the cryptocard.If the input slot-id is larger than the slot-number of the router, the system will prompt“Invalid encrypt-card slot-id”.51
